- Measurement directly in the water
- Recalibration with secondary standard
Precise re-calibration is possible - Lowest stray light level, also in heavily reflecting stainless steel tubing
- Extremely low maintenance
- Various process connections
- Various options for presenting and transferring the measured data to PLC/SCADA
- Web interface
The AquaScat measures the turbidity of potable water according to IEC 27027, with the measurement carried out directly in the water. This reduces maintenance work to a minimum. The calibration is done with a checking unit that is installed when needed. Various customer wishes can be catered for with the different options for data visualization and connection to a PLC/SCADA. Thanks to the different process integration options, a solution can be found for virtually any requirement.
Measuring principle | 90° Scattered light according to ISO 7027/EN27027 |
Nominal range | 0 .. 4’000 FNU |
Scale ranges | 8, freely programmable |
Resolution | 0.001 FNU |
Enclosure | Stainless steel 1.4571, PPSU, sapphire |
Protection | IP68 (Electrical connector IP67) |
Sample flow rate | max. 3.0 m/s |
Sample temperature | 0 .. +60 °C |
Sample pressure | max. 10 bar @ 20 °C |
Ambient temperature | 0 .. +60 °C |
Humidity | 0 .. 100 % rel. |
Supply voltage | 24 VDC +/−10 %, galv. Isolated from housing of sensor |
Power input | max. 2 W |
Dimensions | Ø 40 × 200 mm |
Connections | 8-wire cable: Option Connection box Conn-R: Option SICON – SICON-M: Option WLAN: |
Light source | LED 860 nm |
Sample connector | Options: |


Đánh giá
Chưa có đánh giá nào.