DAT 400 profinet Pavone Sistemi weight transmitter

Pavone Sistemi’s WORLDWIDE EXCLUSIVE DEALING, high performance and reliability
USB port, output RS232, ASCII Protocols or MODBUS RTU
Upload and download function for programming with 1006 TESTER
Directly connectable with protocols TCP, MODUBUS/TCP, UDP, IP, ICMP, ARP
Available also with PROFINET
10 points linearization
Calibration done using certificates of transducers
Configuration and calibration from the front panel or PC via the USB serial port

TECHNICAL CHARACTERISTICS DAT 400/PROFINET

Trasducer input voltage:	5 V (max 6 load cells 350 Ohm)
Measuring range:	-0.5 ÷ +3.5 mV/V (-3.9 ÷ +3.9 mV/V optional)
Input sensitivity:	0.02 microV/division
Linearity:	< 0.01% FS
Gain, drift:	< 0.001% FS/ °C
Display:	6 digit, red LED (7 segments), h 14 mm
A/D Converter:	24 bit
Resolution:	> 16.000.000 counts
Visible resolution:	60.000 divisions displayable on net weight
Divisions value (adjustable):	x1, x2, x5
Decimal:	0.0 ; 0.00 ; 0.000
Filter:	0.1÷25 Hz adjustable
Keyboard:	4 tactile feedback buttons
Tool voltage:	24 Vcc ±15% – power 5 W
Temperature range:	-10 ÷ +50 °C
Storage Temperature:	-20/+70°C
Logic output:	2 Solid-state relays, (maximum load 24 Vdc / 100 mA each)
Logic input:	2 optoisolated 24 Vcc PNP (External voltage)
Serial door:	USB, RS232C with ASCII or Modbus RTU protocols
Transmission distance:	15m (RS232C)
Peak Hold function:	only for dynamics measures
Baud rate:	2400, 9600, 19200, 38400, 115200 adjustable (for RS232)
Regulatory compliance:	EN61326-1, EN55011 and EN55014 for EMC; EN61010-1 for electrical security
Electrical connection:	Screw terminals 5 mm
Dimensions and weight:	106 x 90 x 58 mm (L x H x P); 250 g
FieldBUS protocol:	PROFINET

Accessories are not to be considered included in the price of each product.
All the above is purely illustrative and not to be understood demanding towards Pavone Sistemi