Đại lý phân phối Kracht tại Việt Nam | Kracht Việt Nam

Bơm bánh răng Kracht

High Pressure Gear Pumps

KP 2 Kracht | KP 3 Kracht

Thanks to their construction (design principle) and the materials used KRACHT series KP 2/KP 3 external gear pumps are suitable for use under the most stringent operating conditions. The housing and the flange mounting cover (see the sectional drawing) – both made of gray cast iron – have high dynamic load capabilities and are therefore insensitive to peak pressures and permanent oscillations. Large-scale PTFE-Pb coated plain bronze bearings on steel backs in the housing and the flange mounting cover carry the extremely finely ground bearing pins of the gear, which consists of the driving shaft pinion.

Displacement

Vg = 20 … 62 cm³/r

Operating pressure

p = … 300 bar
p = … 4351 psi

Speed range

n = … 3000 1/min